Pint V full build
A standard Pint, rebuilt from the ground up
VESCed with a Floatwheel drop-in kit, a custom 21700 P50B pack built to fit, and custom laser etched rails to show its VESC roots.
Onewheel parts, printed to order
Make your board yours
Printed parts, custom batteries and full builds for most Onewheel boards. Pick a colour, change a detail, or send us a file. Everything is made to order on machines we run ourselves, so your board does not have to look like everyone else’s.
Boards
Stock fitments in the shop for most boards plus custom work to order
Colours
A library of stock colours, or we source your unique shade
VESC
Setup, configuration and fault-finding on VESC-based boards
Batteries
Custom built packs built right here in the UK
Trending Now
Browse the shop →
Force Flow Foot Hooks
Pair of bolt-on hooks. Locks the back foot in for hard carves without pinching the pad
Flight Shield
Laser cut replacement fender
Stompie Fender Deletes
A fender delete designed for Fungineers X7 boards using stompies
Charge Port Plug
A threaded charge plug protector designed for the Funwheel Controller Box. Fits a GX16 port.
Fender Delete TFL DropTop Adapter
A adapter to allow the Fungineers stompies and X7 rails to mount a regular TFL drop top fender and lowers too.
Crundwheel Fins
Aftermarket fins for your flight fender
Valve Cap
Protect your tire valve from trail grime
XR Bumper Guards
Bumper guards for the XR
Superflux Motor Bearing Seals
Bearing seals for your superflux onewheel motor
Custom prints
Send us your file
Email an STL, STEP or 3MF (or just a link to one) and we will quote it by hand: wall thickness, orientation and whether a part will survive a footpad impact all get checked before anything goes on a plate. Bulk runs for group buys are priced separately.
hello@crundwheel.com · replies within two working days
Official supplier
Forceflow hooks
Crundwheel are an official supplier for Mason Fagé in the EU, and these hooks are an incredible solution for anyone who wants to ride with more control and less fatigue. The hooks are printed in soft TPU, and the design has been optimised for both comfort and performance.
Battery building
We build packs too
Custom packs, rebuilds and repairs: cell choice, fusing and fitment worked out with you before anything gets welded. High-drain cells when you want torque, high-capacity when you want the miles, and an honest answer about which one your riding actually needs.
Every pack is spot welded, fused per group, tested for capacity and logged before it goes back in the board. If yours has a fault rather than a design problem, we will try to fix it first.
VESC support
And custom boards
Wiring, custom looms, controller configuration and fault-finding on VESC-based builds. Correct gauge for the current, routed clear of rail edges and heat, and limits set to your pack rather than left at defaults.
If a board is throwing faults or a build has stalled part-way, send us what you have and we will work out what it needs.
Builds we worked on
Printed parts, custom packs and VESC work: three boards we saw all the way through.
GTS refresh
Refreshing a pre-loved GTS
Custom rim savers printed to fit and the mag handle re-lined, bringing a well-used board back to something worth riding daily.
XLV frame design
A folded sheet metal frame for the XLV
Designed for Luke Massey to take his XLV project into volume production: a folded sheet metal frame that swaps machined parts for stamped and bent stock, so units can be made in quantity rather than one at a time.
Event awards
Medals and trophies for the 2026 season
Awards for Shred the Shires 2026 and the medals for the EOL Finals. Multi-colour medals printed in batches with the artwork built into the part rather than stuck on afterwards, so nothing peels off a lanyard by the end of the day.
The trophies were printed on a Sonic Fusion 4K Mini, cleaned up and mounted on turned wooden bases.
One of them was hand painted as a special raffle prize, raising money for a local charity.
About Crundwheel
Hi, I’m Ben
My brother discovered the Onewheel first and one go on it during lockdown was all it took! I bought my own about five years ago and never really got off it again.
By day I’m a Principal Electronics Engineer, and I’ve been designing and making things on the bench and on a printer for about as long as I can remember.
I built my first 3D printer about a decade ago and I started making bits and pieces for my own board pretty early on too. After the fifth or sixth person in our local community asked if I could print them something as well, it clicked: if that many people near me needed things, riders across the whole country probably did too. That’s the whole reason Crundwheel exists.
Outside of Crundwheel I help run Shred the Shires: building the event’s website, have 3D printed every trophy and medal since it started, and running the bar and catering. At Send It Surrey I fly FPV, streaming the racing live to a big screen for everyone to watch.
What people say
From riders who’ve had parts made
Kate Paxton
Ben 3D-printed an AirTag holder that slots perfectly into my GT-S rail. Great fit, great work.
James Grant
I ordered some fender adaptors for my XL. Ben tweaked the design to make sure they'd fit, and the print quality was excellent — highly recommended.
Mark Coningsby
My board only works coz Ben makes good stuff!
Daniele Zancana
Very happy from the very start, the forceflows gave me an immediate confidence boost with that locked in feel while still be able to bail out if needed. I managed to try a few bonks and bonk drops that I never even imagined to try before. Really happy customer 🤙🤙
Adam Walding
These are the best hooks I've used. I prefer them to overlanders. My feet stay in place over the chunkiest terrain and I have a more confidence in jumps and drops. I would definitely recommend Ben's force flow hooks!
Community
Check out our wider community
A few other events and businesses in the Onewheel world worth knowing about.
Shred the Shires
Onewheel Festival & EOL race weekend Cambridgeshire, UK
Send It Surrey
A 3 Day Onewheel Festival in Europe
EOL
European Onewheel League Race Events
Yeeew
Onewheel accessories shop in the UK
Trail Banger Apparel
Aftermarket griptape, accessories, tyres, railguards and protection
FlightPack EU
Fly safe batteries and accessories
The Nosedive Podcast
Onewheel themed podcast with Mark Coningsby and Vinie Vizzle
Flowstate PEV
UK supplier of Onewheel accessories
Float The Highlands
Multi-day Onewheel and personal electric vehicle (PEV) event in the Scottish Highlands
Grippy Sheet Studio
3D printable griptape generator
Based in Cambridgeshire
Skip the post if you’re nearby
We’re based in South Cambridgeshire, near Cambridge. Everything is printed and packed here before it goes out.
Local? Collect your order for free, just email hello@crundwheel.com first so we can find a time that works.
We get out to Cambridgeshire group rides too, and can bring an order along instead of posting it. Mention it when you order and we’ll sort out the details.